Aqueous Banner Signage
Aqueous Photo & Fine Art
Chemistry
Inkjet Ink
Inkjet Printers
Latex Banner Signage
Latex Photo & Art Paper
Latex Wallcoverings
Liquid Laminates
Plates
Screen Printing Inks
Solvent Banner Signage
Solvent Photo & Fine Art
Shopping Bag: 0 item(s) in bag/Total:$0View CartCheckout
Home>Screen Printing Inks
Bleed Resistant Plastisol Ink
Part NumberPFBR
Bleed Resistant Plastisol Ink
Email a friend Email a friend
Review this item Review this item
Price
Your Price:
$21.55
Availability:
Back Order
Choose Options
Color
Royal Blue
Chrome Yellow
Light Purple
Scarlet Red
Size
Quart
Quantity
Description
Phthalate Free, Highly pigmented
Superb Opacity for dark backgrounds
Ideal for printing on bleed-prone textile substrates

In Compliance with CPSIA (Consumer Product Safety Improvement Act) 2008 Section 101 Lead Content in substrates (<300 ppm lead) Section 108 Phthalates (<.1% DBP DEHP,DINP,DIDP)

STOCK, END-USE:

Cotton, 50/50 cotton/polyester blends, and some synthetics.

DESCRIPTION:

Bleed Resistant Plastisol Ink/PF-BR Series is popularized for its Bleed Resistant characteristics on dark-colored or bleed-prone textiles. It assures non-migration of fabric dye into the print and leaves a very high opaque, soft-hand finish.

Bleed Resistant Plastisol Ink/PF-BR Series is ready-to-use straight from the container.

Important Note: Bleed Resistant Plastisol Ink/PF-BR Series may not be used for heat transfer applications. Stir ink before using especially if separation occurs during storage. Always store container with lid on to ensure consistently smooth viscosity.

Note: Pre-test on actual substrates before any full production run, for dye bleeding, adhesion, wash fastness and other desired effects.

FINISH:

Durable, soft-hand finish.

COLORS:

Available low-bleed opaque colors.

SCREEN FABRIC:

Mesh counts up to 160 monofilament polyester (64T European Mesh).

STENCIL:

Dual-sensitized direct method photo emulsion or SBQ pre-sensitized photo emulsion or equivalent.

CURE/DRYING:

Heat-cure at approximately 320F (160C) for 1 to 3 minutes. Will not air-dry.

MODIFICATIONS:

In situations where bleed resistance and opacity is not crucial, extend with PF-GP 081 Clear Extender Base for longer ink mileage.

To reduce ink viscosity with RE-703 or RE-704, add 5% or less (by weight of ink). Reducer is to be used very sparingly and only when RE-705 can be added up to 10-20% (by weight of ink) if Bleed Resistance, Opacity color shade is not crucial.

SQUEEGEE:

When printing textiles, use a medium hard (65-75 durometer) squeegee.

STORAGE:

Plastisols respond to heat. Always store at cool room temperatures below 90F (32C). Avoid exposing inks to elevated temperatures before printings.

PACKAGING:

1- quart (0.945 Liter), 1-gallon (3.78 Liters), 5-gallon (18.9 Liters) containers. *Drums available in 30-gallon (113.4 Liters) and 55-gallon (207.9 Liters)

SAFETY & HANDLING:

Refer to Material Safety Date Sheet (MSDS) for complete information.

WASH UP SOLVENT:

T-125 Wash-up or equivalent. / SC-510 Bio. Wash-up. (Non-Petrochemical)

MODIFIERS:

PF-GP081 Clear Extender Base / RE-703 Quick Flash Reducer / RE-704 Clear Reducer / RE-705 Curable Reducer

COLOR RANGE:

All colors are formulated using non leaded pigments. *Other colors available upon request. Contact us for more details!